Publications

Publications

Paper/journal/article

2019

  1. Intrusion detection system for automotive Controller Area Network (CAN) bus system: a review.Lokman, S.-F., Othman, A.T., Abu-Bakar, M.-H.Eurasip Journal on Wireless Communications and Networking. https://link.springer.com/article/10.1186/s13638-019-1484-3

2018

  1. Abul Hasan, M., Abu-Bakar, M.-H., Razuwan, R., & Nazri, Z. (2018). Deep Neural Network Tool Chatter Model for Aluminum Surface Milling Using Acoustic Emmision Sensor. MATEC Web of Conferences, 217, 03003. https://doi.org/10.1051/matecconf/201821703003 
  2. Hadzir, M. N. H., Norfaidayu, Z. A., Sabri, M. S. M., & Abu-Bakar, M. H. (2018). Investigation of Damping Coefficient For Magnetorheological Elastomer. MATEC Web of Conferences, 217, 02003. https://doi.org/10.1051/matecconf/201821702003

2017

  1. Siti Lydia, R., Mokhtar, R., Muhamad Husaini, A. B., & Norhaniza, B. J. (2017). Design and development of coil casing MRF brake system. MATEC Web of Conferences, 90, 01017. https://doi.org/10.1051/matecconf/20179001017
  2. Abul Hasan, M., Abu-Bakar, M.-H., Razuwan, R., & Nazri, Z. (2018). Deep Neural Network Tool Chatter Model for Aluminum Surface Milling Using Acoustic Emmision Sensor. MATEC Web of Conferences, 217, 03003. https://doi.org/10.1051/matecconf/201821703003 
  3. Hadzir, M. N. H., Norfaidayu, Z. A., Sabri, M. S. M., & Abu-Bakar, M. H. (2018). Investigation of Damping Coefficient For Magnetorheological Elastomer. MATEC Web of Conferences, 217, 02003. https://doi.org/10.1051/matecconf/201821702003

2016

  1. Aznizam, A., Husaini, M., Mohd Yusof, Z. N., Ibrahim, M. R., & Maidin, S. (2016). Design and fabrication of interference Press-Fit Nut. ARPN Journal of Engineering and Applied Sciences, 11(3), 1515–1523. https://www.mendeley.com/catalogue/design-fabrication-interference-pressfit-nut/
  2. Aznizam, A., Husaini, M., Mohd Yusof, Z. N., Ibrahim, M. R., & Maidin, S. (2016). Inprenut application in design for assembly : case study on wheel mobile robot platform construction. ARPN Journal of Engineering and Applied Sciences,  11(3), 1542–1549. https://www.mendeley.com/catalogue/inprenut-application-design-assembly-case-studywheel-mobile-robot-platform-construction/

2015

  1. Zulkarnain, M., Muhamad Husaini, A. B., Mariatti, M., & Azid, I. A. (2015). Particle Dispersion Model for Predicting the Percolation Threshold of Nano-Silver Composite. Arabian Journal for Science and Engineering, 41(6), 2363–2376. https://doi.org/10.1007/s13369-015-1989-y
  2. Kadir, H. A., Helmy, M., Wahab, A., Arshad, M. R., & Abu-Bakar, M. H. (2015). Numerical Investigation for Cooperative Multi Blimp System. ARPN Journal of Engineering and Applied Sciences, 10(20), 9783–9789. https://www.arpnjournals.org/jeas/research_papers/rp_2015/jeas_1115_2939.pdf

2014

  1. Husaini, A. B., Izzat, G., Zahurin, S., & Rusli, O. (2014). Development of Machine Vision Positioning System of Magnetorheological Fluid (MRF) Actuator. Applied Mechanics and Materials (470). 625–629. https://doi.org/10.4028/www.scientific.net/AMM.470.625
  2. Zulkarnain, M., Hilmi, R. A. A. M., Husaini, A. B. M., Mariatti, M., & Azid, I. A. (2014). Predicting the RVE size of micro-particle composite for electrical purpose using particles dispersion developed. Microsystem Technologies, 22(2), 287–296. https://doi.org/10.1007/s00542-014-2383-5
  3. Analysis of Surface Roughness and Material Removal Rate for Metal Matrix Composite Al - Si10% AlN in EDM Die Sinking Operation. Advances in Materials and Processing Technologies (AMPT 2014)
  4. Tool Wear Metal Matrix Composite 10wt% AlN reinforcement using TiB2 cutting tool. Advances in Materials and Processing Technologies (AMPT 2014)
  5. Tool Wear W hen M achining AlSi /AlN Metal Matrix Composite 10wt% Reinforcement using TiN C utting Tool. Journal/Inovasi MARA
  6. Optimization an Axial Rake Angle Face Milling Using Taguchi Method and Finite El ement Analysis. Applied Mechanics and Materials Journal Vols. 465 - 466 / Trans Tech Publications, Switzerland

image12
image13

Conference

2020

  1. The Impact of Different Feature Scaling Methods on Intrusion Detection for in-Vehicle Controller Area Network (CAN)

2019

  1. Modelling and Close Loop Control System For Magnetorheological Elastomer  Linear Actuator (ICVSSD 2019), M. N Hazwan Hadzir, Muhamad Husaini Abu  Bakar, Ishak Haji Abdul Azid.
  2. Razuwan, R., Abu Bakar, M. H., & Mohd-Kamal, M. S. (2019). Teenage  driving behavior modelling using deep learning for driver behaviour  classification. Proceedings of the Third International Conference on  Computing, Mathematics and Statistics (iCMS2017), 449–455. https://doi.org/10.1007/978-981-13-7279-7

2018

  1. S. Lokman, A. T. Bin Othman and M. Abu-Bakar. (2018). Optimised  Structure of Convolutional Neural Networks for Controller Area Network  Classification. 14th International Conference on Natural Computation,  Fuzzy Systems and Knowledge Discovery (ICNC-FSKD), Huangshan, China,  475-481. doi: 10.1109/FSKD.2018.8687274

2014

  1. M. Z. A. M.F.M.A. Majida, M.Sabri Sidika,M Husaini A.Ba, K. Shahrila,  Zainal Nazria, Shukri Zaina, “3D Simulation of Three-Dimensional Filling  Process for Stacked-Chip Scale Packages ( S- 3D Simulation of  Three-Dimensional Filling Process for Stacked-Chip Scale Packages (  S-CSPs ),” no. OCTOBER, 2014.
  2. M. F. M. A. M. and A. B. Muhamad Husaini . M. Sabri Sidika, A. Afiriena,  Nurulhuda Amrib, K.Shahrila and A, “Design Analysis of Joining Metal  and Glass Fiber Reinforced Plastics ( GFRP ) Design Analysis of Joining  Metal and Glass Fiber Reinforced,” no. OCTOBER, 2014.

2011

  1. F. Mohamad Yusop, M. K. M. Mohd Jamil, D. Ishak, M. Husaini, and S.  Masri, “Investigation of electromagnetic force during short-circuit test  in three-phase busbar system,” 2011 IEEE Colloq. Humanit. Sci. Eng.  CHUSER 2011, no. Chuser, pp. 340–344, 2011

image14

Book Chapter

2019

Progress in Engineering Technology.  ISBN 978-3-030-28505-0  

Advance Engineering for Process and Technologies. ISBN 978-3-030-05621-6


2018

Mohamad Sidik M.S., Bolhassan R., Zahelem M.N., Abu-Bakar MH. (2018) Study of MSI300 Propeller Characteristics Using Computational Fluid Dynamics Analysis. Engineering Applications for New Materials and Technologies. Advanced Structured Materials, 85, 541-549. https://doi.org/10.1007/978-3-319-72697-7_44


2011

Muhamad Husaini, Zahurin Samad and Mohd Rizal Arshad (2011). Autonomous Underwater Vehicle Propeller Simulation using Computational Fluid Dynamic, Computational Fluid Dynamics Technologies and Applications, Igor V. Minin and Oleg V. Minin (Ed.), ISBN: 978-953-307-169-5, InTech, pp. 293-314 . 


image15

Patent

2019

A System and Method for Monitoring A Teaching and Learning Session (Filing)


2015

Multi Directional Magnetorheological Fluid Valve (PI2015001062)